For use on rigid machined flanges with less than 3.8mm gap
OEM approved for use where anaerobic gasket is specified
Eliminates preformed, pre-cut, paper, rubber and cork gaskets
Flexes with flanges that move in service
Withstands temperatures to 149°C
Flexible, gasketing material for use on rigid machined flanges with less than 3.8mm gap. OEM approved – use where OE’s specify “anaerobic” gasket (cures in the absence of air). Withstands temperatures to 149°C. Eliminates preformed pre-cut, paper, rubber and cork gaskets. Flexes with flanges that move in service.
Permatex Anaerobic Flange Sealant is a flexible gasketing material for use on rigid machined flanges with less than 3.81mm gap.
Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
Spray Permatex® Surface Prep™ activator on one surface only. Allow to dry 1-2 minutes.
Apply a continuous bead of sealant to the unprimed surface.
Assemble mating surfaces with minimal lateral movement. Excess sealant can be wiped away with a cloth and shop solvent.
TO DRESS A GASKET:
Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
Spray Permatex® Surface Prep™ activator on one surface only. Allow to dry 1-2 minutes.
Completely cover both sides of the precut gasket with sealant.
Place coated gasket on flange, and assemble mating surfaces with minimal lateral movement.
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
Ask The Experts anything on our product range. We will follow up with you via email within 24-48 hours. Click a product to find out where you can buy online. Not sure on what product? Click here to view our product selector tool.
