Permatex® 30 Minute High Strength General Purpose Epoxy 25ml
Click to zoom in

Permatex® 30 Minute High Strength General Purpose Epoxy 25ml

Permatex®
PX84107
  • Clear appearance.
  • When cured, can be drilled, sanded, threaded or filed
  • Permanent strength up to 3500 PSI
  • Resistant to water and solvents.

  • Clear appearance.
  • When cured, can be drilled, sanded, threaded or filed
  • Permanent strength up to 3500 PSI
  • Resistant to water and solvents.

Permatex PermaPoxy 30 Minute High Strength Epoxy is a versatile, easy-to-use, general purpose, two-part epoxy adhesive and filler system that eliminates the need for welding or brazing. This epoxy sets in thirty minutes with no clamping needed, and has a clear appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed, with a permanent strength up to 3500 PSI. Resistant to water and solvents. Temperature range of -51°C to 82°C. Permatex offers convenient solutions for a wide range of bonding applications. Available in many packaging configurations, Permatex epoxies are versatile and easy-to-use. From general-purpose to material-specific, Permatex offers a formulation that will work for you.

Permatex 30-minute High Strength General Purpose Epoxy is an adhesive and filler system that is ideal for complex, multi-piece assemblies.

Read More
Read Less

DIRECTIONS:

  1. PROTECT: Work area must be protected from accidental spills.

  2. CLEAN: Surfaces must be clean, dry and free of grease and oil.

  3. PREPARE: Roughen smooth surfaces (using abrasives or sandpaper).

  4. OPEN PACKAGE: Remove syringe. Turn syringe nozzle end up and pull plunger back slightly (1/8”). Allow air bubbles to rise to top. Snap off and save storage cap.Push plunger to dispense equal amounts of hardener and resin onto discard-able surface such as a piece of cardboard. Mixing paddle will pop out from plunger. Pull back plunger to stopflow. Snap cap back on.

  5. MIX THOROUGHLY: Thoroughly mix with paddle provided for two minutes until evenly colored.

  6. APPLICATION: Apply small amount of mixture to both surfaces and assemble parts immediately (product sets in approximately 30 minutes). Remove any excess epoxy immediately.

  7. CURE TIME: Usable strength is reached in 8 hours at 72ºF (22ºC). Cooler temperatures may require longer set time.

  8. CLEAN-UP: Attach nozzle cap and store in molded tray.

NOTE: Adhesive will not bond most polyethylene or polypropylene plastics.

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Your cart

×