Permatex® Self-fusing Silicone Tape
Click to zoom in

Permatex® Self-fusing Silicone Tape

Permatex®
PX82112
  • Self-fusing silicone repair tape
  • All purpose repair tape made out of specially formulated silicone rubber
  • Contains no adhesives
  • Chemically bonds to itself upon contact
  • Simply stretch and wrap for an airtight, waterproof seal in seconds

  • Self-fusing silicone repair tape
  • All purpose repair tape made out of specially formulated silicone rubber
  • Contains no adhesives
  • Chemically bonds to itself upon contact
  • Simply stretch and wrap for an airtight, waterproof seal in seconds

A self-fusing silicone repair tape that has been used by the Military for years! An all purpose repair tape that is made out of specially formulated silicone rubber. Contains no adhesives, yet chemically bonds to itself upon contact. Simply stretch and wrap for an airtight, waterproof seal in seconds. Replaces duct tape and electrical tape.

Permatex Self-fusing Silicone Tape is an all purpose repair tape that contains no adhesives, yet chemically bonds to itself upon contact, making airtight, waterproof seals in seconds.

Read More
Read Less

DIRECTIONS:

  1. Remove any excess dirt, oil, etc. from repair area and clean hands with Permatex® Fast Orange® hand cleaners or soap and water before starting the repair.

  2. Remove Permatex® Self-fusing Silicone Tape from the package and peel 1-2 inches of liner from the tape.

  3. Press the exposed tape firmly to the surface to be repaired, making sure to completely overlap the first wrap over itself while at the same time stretching the tape.
  4. While stretching the tape as it is wrapped, overlap each layer approximately 2/3 of the previous wrap, peeling off the liner as you wrap. The tape fuses on both sides as it is wrapped and it will start bonding together almost immediately. The more the tape is stretched, the faster it fuses together and the stronger the grip. Permatex® Self-fusing Silicone Tape stretches up to 3 times its original length.


  5. Finish by completely overlapping the last wrap and press the tape firmly. Do not try to reposition or reuse the tape. At room temperature, the repaired area is in most cases sealed immediately and the tape fully cures in 24 hours.

  6. Check the repair area periodically to ensure that the leak has stopped. If a leak is detected, remove the tape (see below) and start over at Step 1.

  7. For Tape Removal and Cleanup

  8. Remove Self-fusing Silicone tape with a safety razor by carefully cutting across the width of the tape. The tape leaves no sticky residue.

  9. Clean hands with Permatex® Fast Orange® hand cleaners or soap and water

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Your cart

×