Permatex® The Right Stuff® 1 Minute Gasket Maker Black 85g
Click to zoom in

Permatex® The Right Stuff® 1 Minute Gasket Maker Black 85g

Permatex®
PX25229
  • Elastomeric rubber gasket technology that is blowout resistant and outperforms pre-cut gaskets
  • Protects against leaks caused by vibration and thermal expansion
  • Formulated to meet or exceed performance standards for long-term sealability, durability and handling
  • Eliminates the need to wait for the gasket maker to cure, allowing for immediate return-to-service
  • Resists ATF, coolant, oil, and other shop fluids
  • Temperature Range: -59°C to 232°C continuous, 260°C intermittent

  • Elastomeric rubber gasket technology that is blowout resistant and outperforms pre-cut gaskets
  • Protects against leaks caused by vibration and thermal expansion
  • Formulated to meet or exceed performance standards for long-term sealability, durability and handling
  • Eliminates the need to wait for the gasket maker to cure, allowing for immediate return-to-service
  • Resists ATF, coolant, oil, and other shop fluids
  • Temperature Range: -59°C to 232°C continuous, 260°C intermittent

Just torque and go! This handy size package contains enough material to completely replace two or three large cut gaskets. The long-lasting, black elastomeric formed-in-place rubber gaskets can be custom fit to any shape or size. Ideal for all non-fuel sealing applications, 1 Minute Gasket™ is superior to most OE gaskets and fleet-tested to be leak-free in more than 5 million miles of heavy commercial use. Protects against leaks caused by vibration and thermal expansion. Temperature range -59°C to o 232°C continuous, 260°C intermittent; resists ATF, coolant, oil and other shop fluids. Sensor-safe.

Permatex The Right Stuff Black Gasket Maker makes leak-proof gaskets instantly, allowing equipment to return to service immediately! It eliminates the need to wait for the gasket maker to cure - just reassemble and go!

Read More
Read Less

DIRECTIONS:

  1. For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex® Brake & Parts Cleaner.

  2. Push nozzle to dispense the Right Stuff®.

  3. Apply a continuous 1/8″ to 1/4″ bead to one surface, surrounding all bolt holes.

  4. Assemble parts within five minutes, tightening bolts to recommended torque levels. Material will fill any surface imperfection.

  5. Equipment can be returned to service immediately. To reuse package, leave a 1/2″ length of material extending out of the nozzle.

  6. Cured material will form a protective plug. To reuse, carefully remove the plug and dispense as before.

NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Your cart

×