Permatex® The Right Stuff® Black Gasket Maker 212g
Click to zoom in

Permatex® The Right Stuff® Black Gasket Maker 212g

Permatex®
PX85224
  • Elastomeric rubber gasket technology that is blowout resistant and outperforms pre-cut gaskets
  • Protects against leaks caused by vibration and thermal expansion
  • Formulated to meet or exceed performance standards for long-term sealability, durability and handling
  • Eliminates the need to wait for the gasket maker to cure, allowing for immediate return-to-service
  • Resists ATF, coolant, oil, and other shop fluids
  • Temperature Range: -59°C to 232°C continuous, 260°C intermittent

  • Elastomeric rubber gasket technology that is blowout resistant and outperforms pre-cut gaskets
  • Protects against leaks caused by vibration and thermal expansion
  • Formulated to meet or exceed performance standards for long-term sealability, durability and handling
  • Eliminates the need to wait for the gasket maker to cure, allowing for immediate return-to-service
  • Resists ATF, coolant, oil, and other shop fluids
  • Temperature Range: -59°C to 232°C continuous, 260°C intermittent

Make leak-proof gaskets and return equipment to service immediately! Permatex’ premier instant gasket maker was designed as a replacement for conventional gaskets. This elastomeric “formed-in-place" material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. Formulated to meet or exceed performance standards for long-term sealability, durability and handling, this material is used on OEM production lines and specified in their service parts programs. Temperature range -59°C to 232°C continuous, 260°C intermittent; resists ATF, coolant, oil and other shop fluids. Sensor-safe. Fleet-tested.

Permatex The Right Stuff Black Gasket Maker makes leak-proof gaskets instantly, allowing equipment to return to service immediately! It eliminates the need to wait for the gasket maker to cure - just reassemble and go!

Read More
Read Less

DIRECTIONS:

  1. For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex® Brake & Parts Cleaner.

  2. Cut nozzle to desired bead size – gaskets are best formed using a 1/16" to 1/4" (2-6mm) bead. A 1/8" (3mm) bead is sufficient in most applications.

  3. Activate PowerBead™ by twisting nozzle counterclockwise one complete revolution. This will raise trigger. Depress trigger to dispense.

  4. On first use, allow a second or two for the valve and nozzle to self-prime before product actually dispenses. Regulate pressure and flow by varying depression angle.

  5. Apply bead to one surface only, surrounding all bolt holes and evenly dispensing around entire circumference.

  6. Assemble parts within five minutes, tightening bolts to recommended torque levels. Material will fill any surface imperfection. Equipment can be returned to service immediately.

  7. After use, simply wipe excess material from applicator’s nozzle and replace plastic cap with a “click.”

NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Your cart

×