Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Elastomeric rubber gasket technology that is blowout resistant and outperforms pre-cut gaskets
Protects against leaks caused by vibration and thermal expansion
Formulated to meet or exceed performance standards for long-term sealability, durability and handling
Eliminates the need to wait for the gasket maker to cure, allowing for immediate return-to-service
Resists ATF, coolant, oil, and other shop fluids
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff® GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms precut gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant, and ATF) and operates in environments to 232°C continuous; 260°C intermittent.
Permatex The Right Stuff Grey Gasket Maker is specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns. This gasket maker makes leak-proof gaskets instantly, allowing equipment to return to se
For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex® Brake & Parts Cleaner.
Cut nozzle to desired bead size gaskets are best formed using a 1/16" to 1/4" (2-6mm) bead. A 1/8" (3mm) bead is sufficient in most applications.
Activate PowerBead™ by twisting nozzle counterclockwise one complete revolution. This will raise trigger. Depress trigger to dispense.
On first use, allow a second or two for the valve and nozzle to self-prime before product actually dispenses. Regulate pressure and flow by varying depression angle.
Apply bead to one surface only, surrounding all bolt holes and evenly dispensing around entire circumference.
Assemble parts within five minutes, tightening bolts to recommended torque levels. Material will fill any surface imperfection. Equipment can be returned to service immediately.
After use, simply wipe excess material from applicator’s nozzle and replace plastic cap with a “click.”
NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
Ask The Experts anything on our product range. We will follow up with you via email within 24-48 hours. Click a product to find out where you can buy online. Not sure on what product? Click here to view our product selector tool.
