Permatex® Water Pump & Thermostat RTV Silicone Gasket Maker 14g
Click to zoom in

Permatex® Water Pump & Thermostat RTV Silicone Gasket Maker 14g

Permatex®
PX22071
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing

  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings.

Water pump and thermostat housings

Read More
Read Less

DIRECTIONS:

  1. For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex® Brake & Parts Cleaner.

  2. Apply an even, continuous 1/8″ bead of silicone to one surface, surrounding all bolt holes. Remove excess at once with knife.

  3. Assemble parts immediately. Do not squeeze out silicone by over tightening bolts.

  4. Silicone dries in 1 hour, and fully cures in 24 hours, at 70˚F - 50% relative humidity. Allow more time in cold weather.

  5. Replace cap after use. Clean hands with dry cloth or Permatex® Fast Orange® Hand Cleaner. Clean tools with non-flammable cleaning fluid.

NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Your cart

×